GIGA-BYTE TECHNOLOGY MZ72-HB2 Скачать руководство пользователя

Страница: 2 / 124

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classifications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:



User Manual: detailed information & steps about the installation, configuration and use this

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

software component (e.g. BMC firmware, rail-kit) compatible with this product.



Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these
documents

For More Information

For related product specifications, the latest firmware and software, and other information, please visit

our website at: http://www.gigabyte.com.

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

http://esupport.gigabyte.com/ to create a new support ticket.

For any general sales or marketing enquires, you may message GIGABYTE server directly by

email: [email protected].

Содержание MZ72-HB2





























































































































Результаты поиска

Содержание MZ72-HB2

Отзывы:

Похожие инструкции для MZ72-HB2

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY MZ72-HB2, Руководство пользователя

Результаты поиска

Содержание MZ72-HB2

Отзывы:

Похожие инструкции для MZ72-HB2

Бренды по названию

Популярные бренды