GIGA-BYTE TECHNOLOGY MZ72-HB2, Руководство пользователя

Страница: 59 / 124

- 59 -
BIOS Setup
Parameter Description
MBA Configuration Menu
(continued)
Š
Setup Key Stroke
– Configures key strokes to invoke the configuration menu.
– Options available: Ctrl-S, Ctrl-B. Default setting is Ctrl-S .
Š
Banner Message Timeout
– Selects the timeout value. (0 defaults to 4 seconds, 15 is no delay,
1-14 is timeout value in seconds)
– Default setting is 4 .
Š
Pre-boot Wake On LAN
– Configures Pre-boot Wake on LAN (WOL).
– Options available: Enabled, Disabled. Default setting is Disabled .
Š
VLAN Mode
– Configures the virtual LAN (VLAN) mode.
– Options available: Enabled, Disabled. Default setting is Disabled .
Š
VLAN ID
– Configures the VLAN ID (1…4094).
– This item is available only when VLAN Mode is Enabled.
Š
Boot Retry Count
– Selects the number of boot retries.
– Options available: No Retry, 1 Retry, 2 Retries, 3 Retries, 4 Retries,
5 Retries, 6 Retries, Indefinite Retries. Default setting is No Retry .
iSCSI Boot Configuration
Menu
Press [Enter] to configure advanced items.
Blink LEDs
Identifies the physical network port by blinking the associated LED.
Press the numeric keys to adjust desired values.
Link Status
Specifies the link status of the port.
Physical Link Speed
Displays the technical specifications for the Network Interface Controller.
Chip Type
Displays the technical specifications for the Network Interface Controller.
PCI Device ID
Displays the technical specifications for the Network Interface Controller.
Bus:Device:Function
Displays the technical specifications for the Network Interface Controller.
Permanent MAC Address
Displays the MAC address of the Ethernet controller.
Virtual MAC Address
Displays the virtual MAC address of the Ethernet controller.
Restore Defaults
Resets the adapter to factory defaults.