GIGA-BYTE TECHNOLOGY GA-F2A58M-DS2H, Руководство пользователя

Страница: 26 / 36

- 26 -
`
GFX Coniguration
&
Primary Video Device
Speciies the irst initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGD Video Sets the onboard graphics as the irst display.
NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
North Bridge as the irst display. (Default)
&
Integrated Graphics
Enables or disables the onboard graphics function.
Auto The BIOS will automatically enable or disable the onboard graphics depending
on the graphics card being installed. (Default)
Disabled Disables the onboard graphics.
Force Always activates the onboard graphics, whether or not a PCI Express card is
installed.
&
UMA Frame Buffer Size
This item is conigurable only when
Integrated Graphics is set to Force
. Frame buffer size is the total
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
use only this memory for display. Options are: Auto (default), 256M, 512M, 1G, 2G.
`
SATA Coniguration
&
OnChip SATA Channel
Enables or disables the integrated SATA controllers. (Default: Enabled)
&
OnChip SATA Type
Enables or disables RAID for the SATA controllers integrated in the Chipset or conigures the SATA controllers
to AHCI mode.
Native IDE Conigures the SATA controller to IDE mode. (Default)
RAID Enables RAID for the SATA controller.
AHCI Conigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface speciication that allows the storage driver to enable
advanced Serial ATA features such as Native Command Queuing and hot plug.
&
PORT0 Hot Plug~PORT3 Hot Plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
&
SATA Power on PORT0~SATA Power on PORT3
Enables or disables each SATA port. (Default: Enabled)
`
Super IO Coniguration
This section provides information on the super I/O chip and allows you to conigure the serial port and
parallel port.
&
Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
&
Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
&
Device Mode
This item is conigurable only when
Parallel Port is set to Enabled . Selects an operating mode for the
onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced
Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode. (Default)