GIGA-BYTE TECHNOLOGY GA-F2A58M-DS2H, Руководство пользователя

Страница: 20 / 36

- 20 -
`
PC Health Status
&
Reset Case Open Status
Disabled Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled Clears the record of previous chassis intrusion status and the
Case Open ield will
show "No" at next boot.
&
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this ield will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set
Reset Case Open Status
to Enabled , save the settings to
the CMOS, and then restart your system.
&
CPU Vcore/DRAM V3.3V/+5V/+12V
Displays the current system voltages.
&
CPU/System Temperature
Displays current CPU/system temperature.
&
CPU/System Fan Speed
Displays current CPU/system fan speeds.
`
Advanced Memory Settings
&
Extreme Memory Proile (X.M.P.)
(Note)
, System Memory Multiplier, Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
&
Memory Timing Mode
Manual and Advanced Manual allows the Channel Interleaving , Rank Interleaving , and memory timing
settings below to be conigurable. Options are: Auto (default), Manual, Advanced Manual.
&
Proile DDR Voltage
When using a non-XMP memory module or
Extreme Memory Proile (X.M.P.)
is set to Disabled , the
value is displayed according to your memory speciication. When Extreme Memory Proile (X.M.P.) is set
to
Proile1
or
Proile2
, the value is displayed according to the SPD data on the XMP memory.
&
Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
&
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
conigure this setting. (Default: Auto)
`
Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. This sub-menu provides memory
timing settings for each channel of memory. The respective timing setting screens are conigurable only when
Memory Timing Mode is set to Manual or Advanced Manual . Note: Your system may become unstable or fail
to boot after you make changes on the memory timings. If this occurs, please reset the board to default values
by loading optimized defaults or clearing the CMOS values.
`
Advanced Voltage Settings
This sub-menu allows you to set CPU, chipset and memory voltages.
(Note) This item is present only when you install a CPU and a memory module that support this feature.