GIGA-BYTE TECHNOLOGY GA-F2A58M-DS2H, Руководство пользователя

Страница: 19 / 36

- 19 -
&
Core Performance Boost
(Note 1)
Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU
performance-boost technology. (Default: Auto)
&
Turbo Performance Boost Ratio
(Note 1)
Allows you to determine whether to improve CPU performance. (Default: Disabled)
&
Core Performance Boost Ratio
(Note 1)
Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed.
(Default: Auto)
&
AMD Cool&Quiet function
Enabled Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce
heat output from your computer and its power consumption. (Default)
Disabled Disables this function.
&
cTDP function
Allows you to set the TDP consumption. Options are Disabled, 45W, 60W. (Default: Disabled)
&
SVM Mode
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Enabled)
&
C6 Mode
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
state is a more enhanced power-saving state than C1. (Default: Enabled)
&
CPU core Control
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS
to enable all CPU cores (number of cores available depends on the CPU being used). (Default: Automatic
mode)
&
APM
Enables or disables Application Power Management. (Default: Enabled)
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
&
Extreme Memory Proile (X.M.P.)
(Note 2)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Proile1 Uses Proile 1 settings.
Proile2
(Note 2)
Uses Proile 2 settings.
&
AMD Memory Proile (A.M.P.)
(Note 2)
Allows the BIOS to read the SPD data on AMP memory module(s) to enhance memory performance when
enabled.
(Default: Disabled)
&
System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
&
Memory Frequency (MHz)
This value is automatically adjusted according to the
BCLK Clock Control and System Memory Multiplier
settings.