Apollo
LIGHT
*,)$6 (/(&75,& *PE+ 3HEHULQJ6WUD $ (XJHQGRUI E 6DO]EXUJ 7 ) 'Z ZZZJLIDVDW
Remove the ApolloLIGHT from the transport case.
Attach the Carabina to the hook on the ApolloLIGHT.
Attach the electrical extension cable ensuring that the locking cap is ensure.
Place the selector switch at the light into the required position:
3RVLWLRQ
XVDJH
FRYHUDJH DSSUR[:
3RVLWLRQ
XVDJH
FRYHUDJH DSSUR[:
The ApolloLIGHT can now be hung from a suitable structure using the Carabina.
Once hung ensure that the extension cable passes through the Carabina.
Ensure that the structure chosen is suitable to support the weight of the ApolloLIGHT and
that the user or other persons will not be injured.
Security when switching on and during the use.
The electrical supply for the ApolloLIGHT should only be made using electrical
extension cables that have been tested and approved. The use ofthe RCD for electrical
protection is recommended.
When connecting additional ApolloLIGHT in the same circuit the rating of the supplly
cable should be considered.
When connecting the ApolloLIGHT over longer distances the rating of the supply
cable should be considered.
To prevent damage to the eye the user should avoid looking directly at the
ApolloLIGHT.
Ensure that the user or other persons will not be dazzled by ApolloLIGHT. The use
of ApolloLIGHT in position 1 should be considered.
The housing of the ApolloLIGHT can reach temperatures up to 55°C. Therefore it is
recommended that the light is to be handled by the user with working gloves.
Before assemly and use all relevant safety instructions are to be read and
understood by the user.
