I0680001/06-2016
23
24V═ electrical actuator complete of connector for feeding cable
wiring.
2 support brackets
2 half-brackets for attach to the frame,
complete with pin
Instruction manual
6. Id plate and marking data
All actuators have
marking and are destined for use in the
European Union without further requirements.
The
marking on the product, packaging and indications for use
provided with the product indicate ‘presumed conformity to the
directives’ issued by the European Community.
The manufacturer holds the technical archive with documentation
providing that products have been examined and evaluated for
conformity to directives.
ID plate data are indicated on a polyethylene
adhesive label applied
externally on the outside of the container, printed in black on a grey
background. Values conform to EC requirements in force.
See figure for example of labelling.
7. Electric power supply
The VARIA SLIM SMALL actuator is powered with a voltage of 24V (DC). The power
supply cable has three conductors: the first conductor
B
LACK
“1” that should be
connected to the + (positive) C
LOSES
the window; the second conductor
Black “2”
that should be connected to the + (positive) O
PENS
the window; the third conductor
Black “3” is the conductor used for the electromechanical lock control communication
signal
.
The 24V low-voltage actuators can be powered using a station with emergency
batteries or an approved class II power supply unit
(double safety insulation)
with an
output voltage of 24V
(-15% ÷ +25%,
in other words
min. 20.4V, max. 30V
), that is to
say, sized based on the number of actuators connected. The VARIA SLIM SMALL
power supply must be suitably protected by fuses.
