S
UPER
D
EE
-
SV
ITALIANO
ITALIANO
ITALIANO
ITALIANO
11
5
ANALISI – Esempio di distillazione
5.1
SELEZIONE DEL DISTILLATO DA RACCOGLIERE
Mettere nell’ampolla il campione di vino o di liquore da distillare ed impostare il quantitativo di distillato
da raccogliere: premere il tasto
“MODE”
e, tramite i tasti
“A”
,
“B”
e
“C”
, scegliere uno dei parametri
pre-impostati (80, 160, 240).
E’
possibile
modificare
il
valore
selezionato premendo contemporanea-
mente il tasto
“SHIFT”
ed il tasto
“A”
(per aumentare) o il tasto
“B”
(per
diminuire) il valore sele-zionato. Ad ogni
pressione dei tasti
“A”
o
“B”
si aumenta,
o si diminuisce, di una unità il valore
preselezionato.
Figura 3
Set : 80
80 160 240
5.2
AVVIO DELLA DISTILLAZIONE
Per avviare la distillazione premere
il tasto
A
.
Figura 4
ATTENZIONE
Prima di avviare la distillazione controllare:
che il tappo dell’ampolla sia ben chiuso (ruotare la manopola in senso orario)
che il matraccio sia sulla bilancia
che la protezione sia abbassata.
Se non c’è un matraccio, o una beuta, sulla bilancia e se la protezione non è abbassata
completamente, la distillazione NON parte ed un segnale acustico avvisa dell’anomalia.