Giant TRINITY ADVANCED SL -, Инструкция по эксплуатации

Страница: 17 / 18

33 34
Derailleur hangers
WARNING
To avoid serious injury
Front and rear derailleur hangers are removable in order to let you
replace them after damage.
• You must never modify the hangers, otherwise the derailleurs mount
may be unsecured and result in poor shifting performance. If the hanger
or derailleur becomes loose, the parts may fall off and may get caught
up into the rear wheel, causing a crash.
• B efore riding the bicycle, check that there is no damage such as crack
or bent. If there is any damage, replace the hanger with a genuine
GIANT hanger.
Front derailleur replaceable hanger plate
The front derailleur hanger is assembled with 2 screws.
Thread compound is recommended to avoid the screws to get loose.
Tightening torque: 4 Nm
Rear derailleur replaceable dropout hanger
The rear derailleur hanger is assembled with 2 screws.
Thread compound is recommended to avoid the screws to get loose.
Tightening torque: 4 Nm
B rake pads replacement instruction:
WARNING
To avoid serious injury
Brake pads are subject to we ar. B efore riding the bicycle, check that the
pads wear indicator is still visible (grooves). If the brake pads have
worn down until the grooves are no longer visible, they should be
replaced.
SpeedControl brake pad cartridges are designed following Shimano
standards.
In order to insure the best braking efficiency and to avoid rim damage,
please refer to the rim or wheel instruction manual. Carbon or aluminum
rims require different pad quality. Make sure you have assembled the
correct pads correctly.
There are two different types of pad and pad holder to be used in the left and
right positions respectively. Slide the new pads into the grooves on the pad
holders while taking note of the correct directions and bolt hole positions.
Tightening torque: 1,5 Nm