Gianni Industries DG-800 Скачать руководство пользователя страница 3

 

Copyright © Gianni Industries, Inc. All rights reserved.   
P-MU-DG-800 Ver. B  Published: 2010.11.22                                                                          
Page: - 3 -/ 8

 

III. Indicator Status & Default Setting Parameters 

Beep & LED Indication:

 

 Mode  Signal 

Status 

LED 

Standby 

Right Green Stay On Power on, Standby 

Green On 

First relay active 

Red On 

Second relay active 

Programming 

Yellow Stay On 

Enter programming mode 

Green Stay On 

Red Stay On 

The slot position of first relay is available. 

The slot position of first relay is unavailable. 

Green Stay On 

Red Stay On 

The slot position of second relay is available. 

The slot position of second relay is unavailable.

Beep 

Standby 

1 Beep 

Valid card, key press, enter programming mode

3 Beeps 

Invalid card, incorrect PIN 

Programming 

1 Beep 

Correct input data, exit programming mode 

3 Beeps 

Incorrect input data, other incorrect operation, 

duplicated card setting 

 

 

Factory Default Setting:

 

Access Mode 

Proximity Card Only 

Format All 

Bits 

Card Storage (MAX. 1000+10 pcs) 

None   

Master Code 

12345 (5 digits) 

Alarm Function (All) 

Function disabled 

Relay Strike Time (Time Delay Setting) 

5 seconds 

Pressed Key Time Delay 

5 seconds (Fixed) 

PIN Code Input Waiting Time 

5 seconds 

Programming Mode Time Delay 

25 seconds (Fixed) 

 

 

 

Содержание DG-800









Отзывы: