forward in the slot till the white buckle is automatically engaged in the concave hole at the two sides of the
memory.
Note
In order to avoid damages to the motherboard or the components, the user must make sure the power supply to
the computer is turned off before the memory or other component is installed or removed. As the groove is set
at the golden finger of the DDR DIMM, the memory can only be inserted into the slot with one direction.
During installation, the user only needs to align the golden finger and the dual-channel groove of the interface
slot and insert it gently. To avoid damage, never apply excessive force in that process.
3)
Install expansion slot card
3.1 Install graphic card
This motherboard provides one interface slot for PCIE 16x AGP. When you install the PCIE graphic card, you
should note that groove of the golden finger must be exactly engaged into the interface slot. In that process, it is
preferable that you are in grounded state, and you should carefully take out the graphic card from the anti-static
bag. Then align the graphic card to the PCIE slot and insert it. After that, tighten the screw on the metal baffle.
3.2 Installing extended devices
At the top side of motherboard are two Mini PCI-E extended slots.
A. Mini PCI-E 1 supports PCI-E, USB, SATA, mSATA (support type will be different by the model)
B. Mini PCI-E 2 supports PCI-E 1X signal, can use mini PCI-E WiFi module etc.
Bracket
Screw
Graphic
card
Motherboa
rd
