10
9
www.giadatech.com
3. Install expansion slot card
Installing Mini-PCIE extended devices
At the rear panel of motherboard is two Mini-PCIE extended slots, to which the
user can connected WIFI module and Bluetooth module etc.
If the user use a module type mSATA on slot 2, then can just use SINGLE
SATA HDD since MI-PCIE2 share same signal with SATA1.
·
Finally, insert the memory into the interface slot gently. If no error occurs at
the moment, insert the card forward in the slot till the white buckle is
automatically engaged in the concave hole at the two sides of the memory.
NOTE:
In order to avoid damages to the motherboard or the components, the
user must make sure the power supply to the computer is turned off before the
memory or other component is installed or removed. As the groove is set at the
golden finger of the DDR DIMM, the memory can only be inserted into the slot
with one direction. During installation, the user only needs to align the golden
finger and the dual-channel groove of the interface slot and insert it gently. To
avoid damage, never apply excessive force in that process.
