GIA Giatsu GIA-PC-09P15, Руководство пользователя, Страница: 12 / 19

D FANMODE
When using the appliance in this mode, the air hose does not need to be attached.
To set this mode correctly:
• Press the M button a number of times until the :: :: symbol appears.
• Select the required fan speed by pressing the � bullan.
Three speeds are available:
f==l
L.!]
1--=l
C:J
Maximum speed:
far maximum fan power
Medium speed:
reduces noise levels but still
maintains a good level of comfort
Low speed:
far silent operation
11
HEA T MODE (only the heat pump model have this function)
To set this mode correctly:
• Press the M button a number of times until the
�+;
symbol appears.
• Select the target temperature 13-27 º C (55-81 º F) by pressing the /\ orV button until the corres­
ponding value is displayed.
• Select the required fan speed by pressing the
e%>
button.
Three speeds are available:
D
n
•
Maximum speed: to achieve the !argel temperature
as rapidly as possible.
Medium speed: reduces noise levels but still maintains
a good level of comfort .
Low speed: far silent operation.
• Water is removed from the air and collected in the tank .
• When the tank is full, the appliance shuts down and"
Fe"
(full tank) appears on the display.
The tank cap mus! be extracted and emptied.
Run off all water left into a basin.
• When all the water has been drained, pul the cap back in place.
• When the tank has been emptied, the appliance starts up again.
--
--
--
•
-
, ,•r
e •
L
�·,
.
-•-
-
,.�
-
N.B.- When operating in very cold rooms, the appliance defreezes automatically, momentarily interrupting normal operation.
"Le"
appears on the display. During this operation, it is normal far the noise made by the appliance to change.
- In this mode, you may have to wait far a few minutes befare the appl iance starts giving out hot air.
- In this mode, the fan may operate far short periods, even though the set temperature has already been reached.
m
DRYMODE
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc).
In dry mode, the appliance should be prepared in !he same way as far cool mode,
with the air exhaust hose attached to enable the moisture to be discharged outside.
To set this mode correctly:
• Press the M button a number of times until the dh symbol appears.
• Select the required fan speed by pressing the � bullan.
Three speeds are available:
Maximum speed:
to achieve the best
dehumidify effect.
Medium speed:
can reduce noise level but still
maintances a better dehumidify effect.
Low speed: far silent operation but weaken the
dehumidify effect relatively.
10
dh
•