GIA Giatsu GIA-PC-09P15, Руководство пользователя, Страница: 11 / 19

MANUALOFREMOTECONTROL
�
'*
Fan bullan
ó
Swing bullan
@0@
(:
Sleep bullan
/\
lncrease bullan
V
Decrease bullan
C)
On/Off bullan
M
Mode bullan
(9
Timar button
ºC/"F Unit Switch bullan
Using the Remote Control
The remole will come with a battery
already installed.
To use the remole for the first time,
remove the transparent insulating
strip from the battery housing by
gently pulling it out.
Replacing the Battery
O
r�_� _---"\
1, '
Screw
�Push the latch to
;·.·/
Battery -, the rightside
Remove
,
7
°
1
�;c
e
;
A Pull the cavar out
�
Battery,g
>Q
cover
Battery
(type: CR2025)
D
COOLMODE
� Poinl !he remole control al !he receiver on !he appliance.
The remole control mus! be no more !han 7 metras away
from !he appliance (without obstacles between !he remole
control and !he receiver).
� The remole control mus! be handled wilh extreme care.
Do not drop it or expose it to direct sunlight or sources
of heal. lf !he remole control do no! work, please lry to
take out the ballery, and pul it back.
H
MAX 7 metres
D
r:k=
<�=�>
INSERTING OR REPLACING THE BATTERIES
• Remove the cover on the rear of the re mote control;
• lnsert CR2025 3V batteries in !he correct position
(see instructions inside the battery compartmenl);
• Replace !he cover.
,/ 11 !he remole control unit is replaced or disposed of, !he ba­
tteries mus! be removed and discarded in accordance with
curren! legislation as they are harmful to the environment.
TURNING THE APPLIANCE ON
Plug into the mains socket, then the appliance is standby.
Press !he ('.) button to make !he appliance turn on.
The las! function active when il was turnad off will appear.
Never turn the a1r cond1t1oner off by unpluggmg from the
mams Always press the button
C) ,
then wa1t fer a few
minutes befrore unpluggmg Th1s allows the appllance to
perform a cycle of checks to verrfy operat1on
To replace !he ballery, follow !he steps below:
1) Use a screwdriver to remove the screw that securas the
battery cover;
2) Push the latch to the right side and pull the battery cover out;
3) Replace !he battery and slide !he ballery cover back into !he
remate;
4) Replace !he screw lhal securas the ballery cover.
Ideal far hot muggy weather when you need to cooling and dehumidify the room.
To set this mode correctly:
• Press the M bullan a number of times until !he
*
symbol appears.
• Select !he !argel temperatura 18-32 º
C (64-90
º
F) by pressing !he
/\ orV button until the corresponding value is displayed.
• Select !he required tan speed by pressing !he � bullan.
Three speeds are available:
D
n
•
Maximum speed:
to achieve the target temperature
as rapidly as possible.
Medium speed:
reduces noise levels but still mainlains
a good level of comfort .
Low speed:
for silent operation.
The most suitable temperatura for the room during the summer varíes from 24
º
C to 27
°
C. You are recommended,
however, not to set a temperatura much below !he ouldoor temperatura.
9