E42.X.1X.6C-02
Operating Manual GIA 0420 N / GIA 010 N
page 3 of 10
3
Safety Requirements
3.1 General safety advices
This device has been designed and tested in accordance with the safety regulations for electronic devices.
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures and
special safety advises given in this manual will be adhered to when using the device
.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not subjected to any
other climatic conditions than those stated under “Specification”.
2. Standard regulations for operation and safety for electrical, light and heavy current equipment have to be ob-
served, with particular attention having to be paid to national safety regulations (e.g. VDE 0100).
3. When connecting the device to other devices (e.g. PC) the interconnection has to be designed most thoroughly as
internal connections in third-party devices (e.g. connection GND with protective earth) may lead to undesired volt-
age potentials.
4. If there is a risk whatsoever involved in running it, the device has to be switched off immediately and to be marked
accordingly to avoid re-starting.
Operator safety may be a risk if:
- there is visible damage to the device.
- the device is not working as specified.
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
5. The buttons at the rear side are necessary for the configuration of the device.
The device is ESD sensitive at this area!!
The configuration must be done considering adequate ESD safety measures!
6.
Warning:
Do not use these products as safety or emergency stop devices or in any other application where failure of
the product could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and material damage.
7. This device must not be used at potentially explosive areas! The usage of this device at potentially explosive areas
increases danger of deflagration, explosion or fire due to sparking.
8. This device is not constructed for use in medical applications.
9. This device must not be run with a defective or damaged power supply unit. Danger to life due to electrical shock!
3.2 Skilled Personnel
Are persons familiar with installation, commissioning and operation of the product and have professional qualification
relating to their job.
For example:
• Training or instruction resp. Qualification to switch on or off, isolate, ground and mark electric circuits and devices
or systems.
• Training or instruction according to the state.
• First-aid training.
4
Disposal Notes
The device must not be disposed in the unsorted municipal waste!
Send the device directly to us (sufficiently stamped), if it should be disposed.).
We will dispose the device appropriate and environmentally sound.
