G 1410
Operation and maintenance | 6
B-H87.0.01.DB200-2.0
15 / 24
NOTE
Unnecessary screwing places the water-tightness of the product, among other things,
at risk and should be avoided.
_
_
NOTE
Read the following handling instructions before replacing batteries and follow them
step by step. If disregarded, the product could be damaged or the protection from
moisture could be diminished.
_
_
Description
Proceed as follows to replace the batteries.
_
Prerequisites
– The product is switched off.
_
Instruction
A
B
C
D
Fig. 3: Batteriewechsel
1. Unscrews the Phillips screws (A)and
remove the cover.
2. Carefully replace the two Mignon AA
batteries (B). Ensure that the polarity
is correct! It must be possible to insert
the batteries in the correct position
without using force.
3. The O-ring (C) must be undamaged,
clean and positioned at the intended
depth. In order to facilitate assembly
and avoid damage, a suitable grease
can be applied.
4. Fit the cover on evenly. The O-ring
must remain at the intended depth!
5. Tighten the Phillips screws (A).
_
Outcome of an action
The product is now ready for use again.
