GHM G 1410, Руководство по эксплуатации

Страница: 14 / 24

6 | Operation and maintenance G 1410
14 / 24 B-H87.0.01.DB200-2.0
6 Operation and maintenance
6.1 Operating and maintenance notices
_
NOTE
The product and conductivity measuring cell must be handled with care and used in
accordance with the technical data. Do not throw or strike.
_
NOTE
If the product is stored at a temperature above 50 °C, or is not used for an extended
period of time, the batteries must be removed. Leaks from the batteries are avoided as
a result.
_
The device is calibrated at the factory with the permanently connected conductivity
measuring cell. The highest system precision can be achieved in this manner. If de-
sired, a gradient correction can be carried out for the product in order to further optim-
ise the accuracy in a narrow range. This is only necessary for normal use. See
Adjust-
ment of the measuring input [ } p. 19] .
6.2 Battery
6.2.1 Battery indicator
_
If the empty frame in the battery display blinks, the batteries are depleted and must be
replaced. However, the device will still operate for a certain length of time.
_
If the
BAT
display text appears in the main display, the battery voltage is no longer ad-
equate for operation of the product. The battery is fully depleted.
6.2.2 Changing battery
_
_
DANGER
Danger of explosion!
Using damaged or unsuitable batteries can generate heat, which can cause the batter-
ies to crack and possibly explode!
– Only use high-quality and suitable alkaline batteries!
_
_
CAUTION
Damage!
If the batteries have different charge levels, leaks and thus damage to the product can
occur.
– Use new, high-quality batteries!
– Do not use different types of batteries!
– Remove depleted batteries and dispose of them at a suitable collection point!
_