10
Setting of the pre-heating period
Each illuminated LED indicates a pre-heating period of 3 minutes. The
manufacturer´s setting is 6 minutes. The max. pre-heating period available is 30
minutes. Do not exceed the default values set by the manufacturer.
While the heater is still warm, the pre-heating period may be shorter when the
heater is switched on again.
Press the ON-button to save your setting, then you enter the
Setting of the power during treatment
The currently-saved value is indicated by one LED bar. The number of illuminated
LEDs indicates the set heating power in 10% steps. Manufacturer`s setting is 30%.
Set the desired value by pressing the
+
and
-
buttons. Save your setting by pressing
the ON-button.
The programming of the heater is complete.
You can finish the programming of the heater by pressing the OFF-
button at any point of time.
10 Cleaning
1.
Clean the housing using a damp cloth or sponge and a small amount of soap
only.
2.
The standard upholstery surface of the MLR is made of synthetic leather or PU
(polyurethane). We recommend the use of suitable protective covers to keep the
lying surface in good condition.
Protective covers available at Gharieni Group GmbH
Standard cosmetic applications.
5-parts terry cloth..
Messages including a small amount of
oil.
Require the MLW-protective cover
made of PU. It protects the upholstery
from stains of oil and seeping in of oil.
Ayurveda applications with oil pouring. Require the special protective cover
including an integrated edge. Only when
using this protective cover, the structure
and the electric components of the
MLR are protected.
3.
Disconnect the MLR from the mains before you clean the upholstery.
