![GGP ITALY NTL 430-R Li 80 series Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/ggp-italy/ntl-430-r-li-80-series/ntl-430-r-li-80-series_operators-manual_2220070021.webp)
EN - 11
13. MAINTENANCE TABLE
Operation
Frequency
Notes
MACHINE
Complete bolt and screw check
Before each use
par. 7.4
Safety checks/check controls
Before each use
par. 6.2
Check the rear discharge guard/grass-catcher
Before each use
par. 6.2.1
Check the cutting means
Before each use
par. 6.2.1
Check the battery charge status
Before each use
*
Recharge the battery
After each use
par. 7.2.3
*
General cleaning and inspection
After each use
par. 7.3
Checking for any damage to the machine. If necessary,
contact the authorised assistance centre.
After each use
-
Cleaning the air filter
Once a month
par. 8.1
Replacing the cutting means
-
par. 8.2
**
Adjusting the drive engagement cable
***
**
* Refer to the battery/battery charger manual.
** The operation must be carried out by your Dealer or a specialised Service Centre
*** At the first signs of any malfunction, contact your Dealer immediately
14. PROBLEM IDENTIFICATION
PROBLEM
PROBABLE CAUSE
REMEDY
1.
The motor does
not start when the
switch is pressed
Safety key is not inserted or is inserted
incorrectly
Insert the key (par. 6.3)
Battery is not inserted or is
inserted incorrectly
Open the hatch and check that the battery is
fitted into its housing correctly (par. 7.2.4)
Low battery
Check the battery status and
recharge (par. 7.2.3)
Motor start-up is slow
Press and hold the control lever
for 1-3 seconds (par. 5.2)
The thermal protection has tripped
due to overheating of the motor
Wait for at least 5 minutes and then restart
the machine
2.
The motor shuts
down whilst working
Battery is not inserted correctly
Open the hatch and check that the battery is
fitted into its housing correctly (par. 7.2.4)
Low battery
Check the battery status and
recharge (par. 7.2.3)
Obstructions that prevent
rotation of the cutting means
Remove the safety key, put on your work
gloves and remove any grass remains
or debris from the lower part of the
machine and/or the discharge channel
All manuals and user guides at all-guides.com
all-guides.com
Содержание NTL 430-R Li 80 series
