•
Do not forcethe motor or speed controller to operate outside oftheirspecifications.
Doing so may cause an electric shock, injury or product damage.
•
Do not operate the product with wet hands. Doing so may cause an electric shock.
•
Do not carry the productby holding the motor lead wire.
This may result indisconnection, as well asinjury.
•
Do not use the product for vertical operation.
Doing so may cause injury or product damage.
•
Only use the motor ifthe surface temperature of the motor is 90℃ or below.
•
If you do not intend to use the product for an extended period, please disconnect
the power supply.
•
Movethe switch to the 'STAND-BY' position before connecting the power supply.
•
Do not touch the product with your hand or any part of your body while
operating the product or immediatelyafter stopping operation.
Asthe surface of the motor is very hot, skin contact should be avoided due to
the risk of a burn.
•
If any abnormality occurs, cut off the power supply immediately to stop the
operation.
•
The controller has no protection device. It is recommended to install an
over-current protection device, earth leakage circuit breaker or overheating
protection device for safety.
•
If the product is operated in parallel with a device controlled by a thyristor for a
welding machine with high capacity electric power, the product may malfunction.
Use a separate power supply circuit.
•
Use the product in an environment with an ambient operating temperature range
of-10℃ to40℃ and ahumidity ofless than 85%.
Avoid exposing the product to direct sunlight, moisture or grease.
If necessary, use the cover to protect the product against these elements.
•
Do not use the product in a place where it will be frequently exposed to static electricity.
•
For disposal purposes, this product should be handled as industrial waste.
•
If you need to repair the product, contact the manufactureror the vendor.
•
Do not modify the product arbitrarily.
Arbitrary product modification by the customer will void the warranty.
Ignoring this warning and handling the
product incorrectly may cause injury or
property damage.
3
Warning
