GF Signet 9900, Руководство по эксплуатации

Страница: 12 / 12

Georg Fischer Signet LLC, 3401 Aero Jet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. (626) 571-2770 • Fax (626) 573-2057
For Worldwide Sales and Service, visit our website: www.gfsignet.com • or call (in the U.S.): (800) 854-4090
For the most up-to-date information, please refer to our website at www.gfsignet.com
3-9900-1P-1.090 Rev. 0 08/18 English © Georg Fischer Signet LLC 2018
All of the basic system setup functions are
automated in the 9900.
This includes identifying the sensor connected
to the 9900, and con
fi guring the display for the
sensor.
When the 9900 is fi rst powered on, it will attempt
to determine the sensor type connected when
ENTER is pressed (unit will display LOOKING
FOR).
If no sensor is attached to the 9900, the words
“TYPE” and “COND/RES” are displayed.
If the 9900 does not identify your sensor type
correctly, use the
▲ and ▼ keys to select your
sensor type.
Press
ENTER
to save selection.
ENTER
System Setup: Step 3
Assign the appropriate sensor type for your system.
System Setup
Base Unit:
Ordering Information
Mfr. Part No. Code Description
3-9900-1P-1 159 001 887 Conductivity Transmitter, Panel
3-9900-1-1 159 001 888 Conductivity Transmitter, Field
Optional Modules
3-9900.394 159 001 699 Direct Conductivity/Resistivity Module
3-9900.395 159 001 697 H COMM Module
3-9900.393 159 001 698 Relay Module
3-9900.270-M1 159 200 120 Modbus Module with 6 Wire Cable Assembly
3-9900.270-M2 159 200 121 Modbus Module with Terminal Block Assembly
3-9900.270-M3 159 200 122 Modbus Module with M12 Connector Assembly