3
2581 FlowtraMag
®
Meter
Speci
fi
cations
General
Pipe Size Range ..................... DN25 (1 in.), DN40 (1.5 in.),
DN50 (2 in.), DN80 (3 in.),
DN100 (4 in.)
Flow Range - Titanium or
Hastelloy C
Minimum .................................. 0.02 m/s (0.07 ft/s)
Maximum ................................. 10 m/s (33 ft/s)
DN25 (1 in.) ............................. 0.53 to 266.35 LPM
(0.14 to 70.36 GPM)
DN40 (1.5 in.) ........................ 1.36 to 662.34 LPM
(0.36 to 174.97 GPM)
DN50 (2 in.) ............................. 2.23 to 1112.60 LPM
(0.59 to 293.92 GPM)
DN80 (3 in.) ........................... 5.11 to 2493.75 LPM
(1.35 to 658.78 GPM)
DN100 (4 in.) ........................... 8.72 to 4357.83 LPM
(2.30 to 1151.22 GPM)
Repeatability ........................... ± 0.5% of reading @ 25 °C (77 °F)
Accuracy ................................. ± 1% ± 0.01 m/s (0.033 ft/s)
(reference condition 50
μ
S/cm and
water based)
Minimum Conductivity ............. 20
μ
S/cm - water based
Suspended Solids ................... 5%
Power Cable Wire ................... 7.6 m (25 ft) 2-conductor shielded
Output Cable Wire .................. 7.6 m (25 ft) 5-conductor shielded
• May be extended up to 305 m (1,000 ft),
fi
eld splice or special
order.
Wetted Materials
Flow Tube Body ...................... PVC
Electrode ................................. Titanium, grade 2 or
Hastelloy C-276
O-rings ..................................... FKM or EPDM
Electrical
Power Requirements
DC Power (Functional Rating) 24 VDC, max 24W (12 to 32 VDC)
Reverse Polarity Protected ..... Up to 35 VDC
Over-Voltage Max. Rating ....... 35 VDC
Please use a power supply that has been IEC 60950/61010/60601
Certi
fi
ed and will not be used outside of its electrical ratings and
matches the environmental conditions of the
fl
ow meter.
Current Output
Passive (low power) 4 to 20 mA per ANSI-ISA 50.00.01 class H
Active Output ........................... 4 to 20 mA
Passive / Active ....................... User selectable
Passive Loop Voltage ............. 12 to 32 VDC
Loop Accuracy......................... ± 32
μ
A (25 °C @ 24 VDC)
Loop Resolution ...................... 5
μ
A
Loop Span ............................... 3.8 mA to 21 mA
Error Condition ........................ None, 3.6 mA or 22 mA
Max. Cable .............................. 305 m (1,000 ft)
Max. Loop Resistance ............ 600
Ω
@ 24 VDC
Compatible with PLC, PC or similar equipment
Frequency Output
Frequency ............................... 5 to 24 VDC, 50 mA max.
Frequency Range ................... 0 to 1500 Hz
Max. Pull-up Voltage ............... 30 VDC, 10k pull-up recommended
Max. Cable .............................. 305 m (1,000 ft)
Compatible with GF 8900, 9900, 9950, and
0486 Pro
fi
bus Concentrator
Digital (S
3
L) Output
Digital (S
3
L) ............................. 4.5 to 5.5 VDC
Serial ASCII, TTL level 9600 bps
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG,Inc. and any use of such marks by Georg Fischer is under license.
Other trademarks and trade names are those of their respective owners.
Digital (S
3
L) Output continued
Compatible with GF 8900, 9900, 9950 and
0486 Pro
fi
bus Concentrator
Max. Cable Length .................. Application dependent
Sensor Con
fi
guration
GF Con
fi
g Tool Bluetooth
®
App
2.4 GHz RF Transceiver Compatible with Bluetooth
®
Low Energy (BLE) 4.2 Speci
fi
cation
GF
Con
fi
g Tool App available in iOS and Android
App
Stores
0252 Con
fi
guration Tool
Environmental Requirements
Enclosure ................................ NEMA 4X / IP65
Relative Humidity .................... 0 to 95% (non-condensing)
Altitude .................................... 4,000 m (13,123 ft)
Storage Temperature .............. -10 °C to 60 °C (14 °F to 140 °F)
Operating Temperature
Ambient ............................... -10 °C to 60 °C (14 °F to 140 °F)
Media .................................. 0 °C to 60 °C (32 °F to 140 °F)
UL environmental Rating ..... UL 50, Type 6P Storage
Maximum Operating
Pressure .................................. 10 bar @ 23 °C (145 psi @ 73 °F)
DN25 (1 in.), DN40 (1.5 in.)
and DN50 (2 in.) ...................... 3.5 bar @ 60 °C (51 psi @ 140 °F)
DN80 (3 in.) and
DN100 (4 in.) ........................... 2.27 bar @ 60 °C (33 psi @ 140 °F)
Shipping Weights
- Titanium or
Hastelloy C,
EPDM or FKM
DN25 (1 in.) ............................. 3.4 kg (7.5 lbs)
DN40 (1.5 in.) ........................ 4.1 kg (9.0 lbs)
DN50 (2 in.) ............................. 4.5 kg (9.9 lbs)
DN80 (3 in.) ........................... 7.5 kg (16.5 lbs)
DN100 (4 in.) ........................... 8.3 kg (18.3 lbs)
Sensor Weights
- Titanium or
Hastelloy C
DN25 (1 in.) ..............................2.7 kg (5.9 lbs)
DN40 (1.5 in.) ........................ 2.9 kg (6.3 lbs )
DN50 (2 in.) ............................. 3.7 kg (8.1 lbs)
DN80 (3 in.) ........................... 5.8 kg (12.7 lbs )*
DN100 (4 in.) ............................ 6.26 kg (13.9 lbs)*
*excludes mounting hardware
Standards and Approvals
CE
UL, CUL Recognized Component
NSF (Titanium only, does not include Flange gaskets)
RoHS
compliant
Manufactured under ISO 9001, ISO 14001 and ISO 45001
China RoHS (visit gfps.com for details)
Declaration of Conformity according to FCC Part 15
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and,
(2)
This device must accept any interference received, including
interference that may cause undesired operation.
Содержание FlowtraMag GF 2581
Страница 26: ...Notes...
