GF DSR 500-1, Руководство по эксплуатации

Страница: 11 / 20

11
2.4.2 Calibration by reference voltage
The feedback module provides a reference voltage of U
Ref
at three testing points. The reference
voltage has a range of 0.1V to 3.2V, which corresponds to 0% and 100% of the stroke.
CH1
6
RM-2
+ -
5 4 3 2 1
CH2
TP (CH2)
TP (CH1)
TP (GND)
Lower limit signal transmitter (CH1) Upper limit signal transmitter (CH2)
1. Using a voltmeter, measure the voltage
between TP CH1(+) and TP GND(-).
2. Using potentiometer CH1, adjust the
reference voltage in accordance with the
target switch position (see table).
1. Using a voltmeter, measure the voltage
between TP CH2(+) and TP GND(-).
2. Using potentiometer CH2, adjust the
reference voltage in accordance with the
target switch position (see table).
Position % Reference voltage Position % Reference voltage
[%] [V] [%] [V]
0% 0,10 50% 1,57
5% 0,25 55% 1,73
10% 0,41 60% 1,88
15% 0,56 65% 2,04
20% 0,72 70% 2,19
25% 0,87 75% 2,35
30% 1,03 80% 2,50
35% 1,18 85% 2,66
40% 1,34 90% 2,81
45% 1,49 95% 2,97
50% 1,65 100% 3,12
Upper limit value sender Lower limit value sender
2.5 Malfunction message
If the connection between positioner and feedback module is interrupted, the feedback module
will return a malfunction message signal (20.5 mA).