manualshive.com logo in svg

GEZE TSA 325 NT, Руководство по установке

Поделиться
Скачать
GEZE TSA 325 NT Скачать руководство пользователя страница 10

Revolving door TSA 325 NT

10

Installation

4.2.3  Fastening the floor ring to the subsurface

 

X

Align the bracket (1) to the floor ring and screw it to the subsurface.

 

X

Align the height of the floor ring once more at these points.

 

X

Weld the bracket (1) to the base of the floor ring.

 

X

Option: Mount the protective plates at BO systems.

 

4.2.4  Fill the floor ring space with screed.

 

à

Take the screed height in the floor ring into account. The dimension of 22 mm in the drawing below refers to 

the standard entrance mats of GEZE.

 

à

GEZE recommends sealing the surface of the screed in indoor areas.

 

X

Fill the floor ring space (1) with screed.

* Refers to the standard GEZE entrance mats

Before continuing system installation, the floor ring must be checked to ensure proper dimensions.

Содержание TSA 325 NT

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды