Revolving door TSA 325 NT
39
Options
5.2.3 Checking the switching disk
X
Mount the switching disk (2) on the upper BO
flange so that the roller (3) of the switch is located
in the recess of the switching disk in the leaf zero
setting.
X
Screw in the screws (1) with thread lock.
If the roller (3) does not fit exactly into the recess,
the switching disk (2) can also be turned.
5.2.4 Connecting the lines
X
Connect the wires (1) of the BO leaf to the termi-
nal (2) on the turnstile cover.
5.2.5 Adjusting the break-out forces of the BO leaves
X
For break-out doors, increase the break-out force on one or two leaves (depending on the number of leaves)
so as to prevent the leaves from becoming wedged against one another.
Locking the central spin axis into position
In order to adjust the break-out forces of the leaves the system has to be locked in position via the central spin
axis.
X
Insert a tool (e.g. screw driver) through the hole in
the bearing disk (1) and counterhole in the floor
bearing disk (2) in the floor bearing.
The central spin axis is locked in position.
