8
Integrierte Schließfolgeregelung Bandgegenseite Slimdrive SD, Datei SD_IS-BGS_*.p65
English
Page
Important:
This installation instruction is based on the mounting instructions for
Slimdrive SD
.
For dimensions, fastening, position of electric connections and starting operation please see mounting instructions
for Slimdrive SD.
The safety regulations described therein must also be observed. If the integrated closer control is used for other
fields of application than those herein described this does not comply with the use in accordance with the
regulations.
Fields of application
The integrated closer control
Slimdrive SD controls the closing procedure of double-wing doors featuring
overlap (typical for fire-proof doors) in a fully mechanical way:
SD-automatic function on both wings
SD-servo function on both wings
SD-servo / automatic function on the 1st closing leaf and
TS 5000 on the 2nd closing leaf
The present system was designed for transom mounting on opposite hinge side
The 1st closing leaf may be mounted left-hand or right-hand, which has to be taken into consideration when
following the below mounting instructions.
The application is possible with:
- a hinge centre
without additional transformer
B3min = 1200 mm B3max = 2800 mm
incl. additional transformer
B3min = 1340 mm B3max = 2800 mm
- a soffit depth
Servo
max. 200 mm
Automatic
max. 300 mm
Functional description
- When opening the 2nd closing leaf, an additional valve in the
Slimdrive SD-IS of the 1st closing leaf,
which is located between the drives, is closed by means of a rope. The 1st closing leaf is ‘waiting‘.
- Once the 2nd closing leaf is nearly closed, the rope tightens, thus releasing the closing hydraulics of the
1st closing leaf.
Illustration:
Transom mounting with intermediate cover (L1), opposite hinge side
