12
Integrierte Schließfolgeregelung Bandgegenseite Slimdrive SD, Datei SD_IS-BGS_*.p65
Illustration: Rope at the bottom of 2
nd
closing leaf DIN right
Shifting point
5° Range of
variation
Shifting offset 5°30'
Illustration: Rope stretched
(Graphics: Valve lever in starting position)
Installation of rope
NOTE:
1st closing leaf DIN left rope at the top
1st closing leaf DIN right rope at the bottom
Insert one end of the rope into valve lever of
Slimdrive SD-IS
(1
st
closing leaf). If an intermediate cover is used, run rope through the
ventilating holes of the side elements of the drives, then pull towards
the driver at the drive of the 2
nd
closing leaf.
Stretching the rope
If the 2
nd
closing leaf is open, slightly stretch the rope without
tension, pull up driver and clamp rope in driver using locking
screw M2.
Function test
Open 1
st
closing leaf, 2
nd
closing leaf remains closed:
The rope must be stretched and must have adjusted the valve
lever as illustrated.
If the 2
nd
closing leaf is moved, the valve lever has to find the
shifting point within a range of variation of approx. 5° to the
perpendicular.
