Rod locking
10
Assembly of RC2 variants of the Slimdrive SL product family
5.2.2 Adjusting the door leaves
X
Observe the applicable standards and guidelines on crushing, shearing and drawing-in spots.
X
Align door leaves flush with each other. Ensure the same level and parallel closing edges when doing so.
X
Set the height and parallel position of the door leaves at the hex of the suspension bolt (16).
X
Tighten the lock nut (17).
X
When the position of the door leaves is correct, tighten the hexagon socket-head screws (13)
slightly
and
secure with lock nuts (12).
