Rod locking
15
Assembly of RC2 variants of the Slimdrive SC product family
6
Assembly of RC2 variants of the Slimdrive SC product family
6.1 Pre-conditions
à
Slimdrive is set up completely
à
Door leaves are hung in and are oriented parallel to each other
à
In the closed position the leaf main closing edges are oriented perpendicular to the floor sickle plate and
to the locking device
à
Locking device is in the unlocked position (dead bolt is retracted into the housing)
6.2 Determining the position of the vertical rods at the floor guide
X
Mark the anticipated entry section of the vertical
rods at the floor sickle plate (1), e.g. with tape (2).
ÖW = opening width
X
Close the moving leaves (3).
