Powerdrive product family
9
Installation
View from above
1
Fastening drill holes
2
Track
3
Sealing profile
4
Wall strip
5
Protective leaf
5.3 Mounting the floor guide
à
The floor guide is selected based on the on-site conditions. One of the following floor guide options must be used.
à
For further information see the respective installation drawing, Chapter 4.1.
5.3.1 Angled floor guide, floor mounting (option)
Angled floor guide with moving leaf left hand slide to open
X
Screw in the angled floor guide (6) with 2 suitable countersunk head
screws (1) and (2).
Angled floor guide with moving leaf right hand slide to open
X
Screw in the angled floor guide (6) with 2 suitable countersunk head
screws (3) and (2).
1
Countersunk screw for moving leaf left hand slide to open
2
Countersunk screw
3
Countersunk screw for moving leaf right hand slide to open
4
outside
5
inside
6
Angled floor guide
5.3.2 Angled floor guide wall installation (option)
X
Screw the floor guide (3) onto the fixed panel (1)
(torque 5 Nm) using two screws (2) if necessary
via a spacer plate (4).
X
If there is no fixed panel, mount the floor
guide onto the wall using suitable attachment
materials.
The spacer plate (4) is available separately.
1
2
3
4
