GEZE E740 Syncro, Инструкция по эксплуатации

Страница: 26 / 36

Open the casement and fit the drive (1) to the drive holders (2, 3): to do that
slide the two oblong holes at the end of the drive (1) onto the matching pins
of the drive holders (2, 3). Turn the drive (1) by 90 degrees.
Adjusting the stroke: turn stroke adjusting switch to required stroke:
1 = stroke 100 mm
2 = stroke 200 mm
3 = stroke 300 mm
4 = stroke 400 mm
Make the stroke adjustments only when the drive is in the closed position.
e.g.:
Close the casement, slide the end piece of the chain with pin and fast action fastener (7)
into the oblong hole of the tilting bracket (4). Run the chain out if required.
Let the fast action fastener (7) engage in the tilting bracket (4).
inserting
engaging
inserting
turning