GEZE E740 Syncro, Инструкция по эксплуатации

Страница: 28 / 36

Fit the drive (1) to the drive holders (2, 3):
to do that, slide the two oblong holes at the end of the drive (1) onto the
matching pins of the drive holders (2, 3).
Turn the drive (1) by 90 degrees.
Adjusting the stroke: turn stroke adjusting switch to required stroke:
1 = stroke 100 mm, 2 = stroke 200 mm, 3 = stroke 300 mm and 4 = stroke 400 mm.
Make the stroke adjustments only when the drive is in the closed position.
Slide the end piece of the chain with pin and fast action fastener (7) into the oblong hole
of the top-hung bracket (5). Run the chain out if required.
Let the fast action fastener (7) engage in the top-hung bracket (5).
inserting
turning
e.g.:
inserting
engaging