Gewiss JOINON I-CON PREMIUM GWJ3201A, Руководство пользователя и инструкция по установке

Страница: 74 / 324

JOINON WALLBOX I-CON PREMIUM electric vehicle recharging unit
74
METHOD 2
# Action to be carried out
1 Disconnect the power supply to the product by turning off the main switch
2 Open the charging station to access the electronic board
3 Remove the microSD card from its slot on the electronic board
4 Insert the microSD card in the specific slot of your PC to open the folder
5
Create a .csv file called “RFID.csv”.
The file structure must be
UID1;
UID2;
Example
A14HNL5T;
DZ47TBD5;
….
6 Save the file in the main directory of the microSD card
7 Insert the microSD card in the slot on the electronic board again
8
Close the recharging station and reconnect the power supply to launch the procedure. If the procedure has
been completed without errors, the station will import the file and the data it contains. The LEDs will flash
blue, 3 times. At the end of the import procedure, the file will be renamed RFID_old.csv on the microSD.
9 Once the command has been executed, the station will return to standby
Contact GEWISS SAT customer service for the UID codes of your RFID cards; you will be asked to give the number
on the cards. 4-byte or 7-byte cards can be saved, as long as they are compatible with standard ISO/IEC 14443
part A
To delete an RFID card from the local list:
# Action to be carried out RGB LED / Touch Slider status
1 Swipe the MASTER key across the RFID reader to access the secret
menu
From fixed green to flashing
white
2 Move in the menu using the slider
until reaching the item RFID
CARD DELETION
Flashing white
3 Confirm the selection with the push-button
Flashing red/ anticlockwise light
effects
4
Take each card that you want to delete from the list and swipe it
across the RFID scanner. The colour of the RGB LED and the text on
the main display indicate correct deletion
Fixed green for 2 seconds
5 To exit the RFID card deletion menu and return to the previous item,
wait until timeout ends.
6 Go to the EXIT item in the menu
From flashing white to fixed
green