Gewiss CHORUS GWA9531, Техническое руководство, Страница: 10 / 57

10
3
GENERAL SETTING
3.1 Activate/deactivate outputs
If light output or one of the three HVAC/occupancy channels is activated, additional
parameter settings appear, for setting up detail functions.
Only when a channel is activated do its parameters and communication objects appear.
3.2 Test mode
Test mode is for checking the detection area. If movement is detected, the lighting switches
on for 2 seconds and then off again. The duration of switch-off depends on the length that
was set up for the safety pause.
Test mode can be activated as follows:
• with a 1-bit “1” telegram on the “Test mode – Input – General” communication object
• with the “Test” button on the remote control
• with both the communication object and the remote control
Test mode can be deactivated at any time as follows:
• automatically after 3 minutes
• after the “Reset” button on the remote control is operated
• with a “0” telegram on the “Test mode – Input – General” communication object
The test mode function must first be activated in General Settings.