34
Common settings for all the control algorithms
Setting the 2nd stage adjustment differential
Use the
or
button key to set the value of the
adjustment differential of the 2nd stage control algorithm
(the gap can be set from 0.1°C to 2.0°C). This screen is only
visible if the second stage has been enabled from ETS. To
confirm your choice and move on to the next parameter,
press the
button key within 30 seconds.
Setting the control modes
Use the
or
button key to modify the operating mode of
the timed thermostat from Master to autonomous and vice
versa (MAS = master; AUT = autonomous). This screen is
only visible if the device has been set as the master on ETS.
To confirm your choice and move on to the next parameter,
press the
button key within 30 seconds.
Sending the PARTY command to the Slave devices
Use the
or
button key to activate (ON) or deactivate
(OFF) the extension of the PARTY command to the devices
set as Slaves of the timed thermostat. This screen is only
visible if the timed thermostat is set as the Master.
To confirm your choice and move on to the next parameter,
press the
button key within 30 seconds.
Sending the HOLIDAY command to the Slave devices
Use the
or
button key to activate (ON) or deactivate
(OFF) the extension of the HOLIDAY command to the devices
set as Slaves of the timed thermostat. This screen is only
visible if the timed thermostat is set as the Master.
To confirm your choice and move on to the next parameter,
press the
button key within 30 seconds.
The setting of the timed thermostat parameters is now
complete. Press the
button key to return to normal
operation.
E
T
S
L
E
S
N
O
Setting the inertia for speed 3
Use the
or
button key to set the value of the inertia
time for fan coil speed 3 (the gap can be set from 0 to 10
seconds). This parameter is visible if the fan coil speed
number is 3. To confirm your choice and move on to the
next parameter, press the
button key within 30 seconds.
USER INSTRUCTIONS
Содержание Chorus GW 10 794H
Страница 2: ......