Gewiss Chorus GW 10 794H, Руководство по программированию

Страница: 10 / 40

USER INSTRUCTIONS
10
Timed thermostat operation statuses
The timed thermostat has three distinct operation statuses:
- Normal operation
- Parameter setting
- Hourly profile programming
When it is switched on, the timed thermostat goes into “normal operation” status. Using the
button key, you can switch from one status to another (the switchover from “parameter
setting” status or “hourly profile programming” status to “normal operation” status also
comes about automatically, 30 seconds after the last pressure on the button keys).
Normal operation
In normal operating conditions, the pages containing information about the timed
thermostat are visualised. If the sections relating to the hourly timer and humidity were
enabled during ETS programming, the relative pages will also be shown.
Choosing the page you want to see
To access the screen listing the pages that can be viewed
(relating to the timed thermostat, hourly timer and
humidity), press the button key and keep it pressed until
the symbol appears.
Use the or button key to scroll through the sequence
(if there are no hourly profiles - P01, P02, P03, etc. - and no
humidity section, the main timed thermostat page will be
displayed). To confirm a page, press the button key or
wait for the 30-second time-out period to elapse.
Pages relating to the timed thermostat
Choosing the HVAC mode (auto, pre-comfort, comfort,
economy or OFF)
If the visible page relates to the timed thermostat, press the
button key to select the required HVAC mode (Auto,
,
, or ).
Each time the button key is pressed, the setpoint of the
selected HVAC mode is shown for a moment.