NOTE: Approximate quantity can be adjusted between 20 and
70 ml for espresso and between 70 and 120 ml for lungo.
NOTES:
• Press espresso or lungo button at any time to stop the brewing process. Empty
cup and follow directions on page 4 to start a new brew cycle.
• Always use cold water to make espresso. Warm water or other liquids could cause
damage to the appliance.
• Never open the handle during brewing cycles.
HOW TO ADJUST ESPRESSO QUANTITY
8. Press the desired cup size
button.
9. The desired cup size will flash
when espresso is brewing.
10. When espresso stops
brewing, the cup light stops
flashing.
11. Lift up the handle to expel
the used espresso capsule
automatically into the used
capsule container.
12. Press the power switch to the
OFF ( ) position. Unplug.
1. Press and hold espresso
or lungo cup button for 3
seconds. The indicator light
will flash.
2. Release button.
3. Press selected cup button
again to start the brewing
process.
4. Press button to stop brewing,
and the espresso maker will
keep this quantity in memory.
NOTE: To restore the factory
settings, hold down both
buttons until they flash twice
(about 3 seconds).
