42
3.3.8 SETUP MENU 2
• FLIP
Users can track an object continuously when it passes through under the
dome camera with setting FLIP to IMAGE (digital flip) or M.E. (mechanical flip).
IMAGE
IMAGE represents digital IMAGE FLIP, which enables users to keep tracking
objects seamlessly; in this mode, almost no delay occurs in comparing with
that under the M.E. mode.
NOTE:
The Privacy Mask function wiII be automatically disabled if the
Image Flip function is enabled, and the screen wiII show "MASK WILL
BE SET OFF."
M.E. (Mechanical Flip)
M.E. is a standard mechanical operation. As the Dome Camera tilts to the
maximum angle, it wiII pan 180° and then continue tilting to keep tracking
objects.
NOTE:
Flip setting is manual-controlled only. If a Preset or a point of other
function (e. g. Sequence) is set in the position that can only be reached
through FLIP motion, when Flip is off, the position cannot be reached
anymore.
OFF
Select this item to disable the flip function.
NOTE:
To make the dome camera tilt between a specific range, such
as -10° to +100° or -10° ~ +190°, please go to
ANGLE ADJUSTER
(see next section) to set the angle range of tiIt. Otherwise, the dome wiII tiIt
90° as the default setting.
SETUP MENU 2
FLIP ENTER
ANGLE ADJUSTER
ENTER
SPEED BY ZOOM
OFF
AUTO CALL
OFF
PASSWORD OFF
SYSTEM RESET
YES
SCAN MODE I
EXIT YES
FLIP SETTING
FLIP OFF
EXIT YES
