getAir SmartFan X, Инструкция по установке и эксплуатации

Страница: 14 / 24

EN 14
4.5 Installing the fan
Align the fan so that it sits straight, with both screw-holes in a horizontal line.
The fan can be fixed to the wall/ceiling using the supplied rawlplugs and screws. Carry out the
cabling as described (see Electrical Installation).
Optional: Install and programme the optional humidity or timer module (see Electrical Installation)
4.6 Replacing the cover
Replace the cover on the fan. To prevent the clip snapping off, first open the iris and then insert
the diaphragm into the guide lugs. Turn the cover clockwise until it snaps into position (1) and
reinsert and tighten the screw (2).
Inside
Cable connection in the casing
1
2