Getac B300 Скачать руководство пользователя страница 131

Страница: 131 / 154

Troubleshooting 8-5

Make sure that both devices are compatible.

Display Problems

Nothing appears on the screen.

During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.

The brightness level might be too low. Increase brightness by
pressing the

hot key.

The display output might be set to an external device. To switch the
display back to the LCD, press the

hot key or change the

display through the

Display Settings

Properties.

The characters on the screen are dim.

Adjust the brightness and/or contrast.

Bad dots appear on the display at all times.

A small number of missing, discolored, or bright dots on the screen
are an intrinsic characteristic of TFT LCD technology. It is not
regarded as a LCD defect.

The external monitor displays nothing.

Make sure that the monitor is turned on.

Make sure that the monitor’s signal cable is properly connected.

Switch the display to the monitor by pressing the

hot key

change the display through the

Display Settings

Properties.

Simultaneous display/multi-display does not work.

Make sure that you turn on the external monitor before turning on the
computer.

Press the

hot key to toggle through the display options or

change the

Display Settings

Properties in Windows.

Содержание B300



























































































































































Результаты поиска

Содержание B300

Отзывы:

Бренды по названию

Популярные бренды

Getac B300, Руководство пользователя

Результаты поиска

Содержание B300

Отзывы:

Бренды по названию

Популярные бренды