CAMERA TRACKING CONFERENCE SYSTEM
20
B.Conference Setup
Various parameters can be set in conference setup manual as below:
FIFO & LIFO: Select first in first out or last in last out for the queue.
Speaking QTY: To set the limitation for speaking units QTY.
Sound Control(ON) & Sound Control(OFF): to turn ON/OFF sound control
function. If click sound control(ON), mic unit will be turned on automatically
when speaking toward the mic.
Meet Mode
：
Discussion Mode: Camera tracks the last turned on unit.
Auto Mode: Camera tracks the speaking unit.
Chairman Mode: Only Chairman unit can be turned on.
All On Mode: All units can be turned on. No limitation for speaking QTY.
CAMERA TRACKING CONFERENCE SYSTEM
19
A.Unit Addressing
All Unit Addressing: Addressing all unit by entering a starting number. For
instance starting from number 1,click “setup”, by pressing the turn on
button on each unit, the units will be set in default subsequent number. The
first one is unit number 1, followed by unit number 2, unit number will
increase in an ascending order till all units are set, and reboot main
controller.
Certain Unit Addressing: Addressing for additional unit. For example, when
there are 100 units for the system, input “101” & connect a new unit to the
system then click Setup. The new unit address will be “101” accordingly.
Note: All the units' cables must be disconnected when setting.
(Normally the process of unit addressing will be done prior to meeting)
