GESTRA ZK 213, Оригинальная инструкция по установке

Страница: 21 / 64

21
Operating the equipment
Do not work on the equipment while it is operating.
DANGER
Risk of bruises when working on the
equipment during operation.
 Switch off the equipment if you have
to work close to any moving
equipment parts.

Make sure that the equipment cannot
be switched on inadvertently.
The stem of the equipment is moved according to
the actuator setting.
 If you want to change the settings please follow
the instructions given in the operating manual
for the actuator.
Attention!
Damage to the equipment or malfunctions
may occur if the stem is not moved for a
longer period of time.
 Make sure that the stem performs at
least one full stroke every two months.
After operation
DANGER
If the equipment is used in contaminated
areas there is a risk of severe injuries or
death caused by harmful substances in or
on the equipment.

Only qualified personnel are allowed to
perform work on contaminated
equipment.
 Always wear the protective clothing
prescribed for contaminated areas
when working on the equipment.

Make sure that the equipment is
completely decontaminated before
carrying out any service work.
 Follow the pertinent instructions for
handling the hazardous substances in
question.
DANGER
Personnel working on pipes are exposed to
safety risks and may suffer severe injuries,
poisoning or even loss of life.
 Make sure that no hot or hazardous
fluid is in the equipment or the pipes.

Make sure that the pipes upstream
and downstream of the equipment are
depressurised.
 Make sure that the installation is
switched off and protected against
unauthorised or unintended activation.

Make sure that the equipment and the
pipes have cooled down to room
temperatures.
 Wear protective clothing that is
suitable for the fluid and, if necessary,
wear protective gear.