GESTRA SPECTORcontrol II, Оригинальное руководство по установке и эксплуатации

Страница: 9 / 32

9
Technical data
SPECTOR control II control, display and operating panel
■
10.4” VGA IR TFT touchscreen
■
2 x Ethernet 100/1000 Mbps RJ45 (intranet/Modbus TCP/IP/OPC)
■
CAN interface
■
Modbus RTU RS232 for specific burner connection
■
USB ports for importing and exporting data
■
Profibus DPS (optional)
■
Supply voltage 24 V DC (+/- 20%)
■
Max. power consumption 17 W
■
IP rating of front IP 65
■
Front panel cutout 329 x 230 mm
■
Front dimensions 345 x 260 mm
■
Service temperature 0..50°C when installed vertically
■
Climate 10..90% rel. humidity
Ready to display operating data for maximum:
■
40 digital inputs 24V
■
40 digital outputs/volt-free relays
■
20 analogue inputs (4..20 mA, 10 R..1 K2, 0..10 V, PT100)
■
20 analogue outputs (4..20 mA, 0..10 V)
■
30 CAN sensors
Including software for the functions:
■
Display of operating data, incl. dual burner data indication via Modbus RTU for Lamtec or Landis & Staefa
■
5 x 4 trend logs for freely selectable signals
■
10 day/month-accumulated flowrate logs
■
5 steam flowrate calculators (with pressure/temperature compensation)
■
10 calculations, e.g. for multiplying switching values, limit values and setpoints
■
20 logic operations, e.g. for enabling controllers
■
5 weekly timers
■
5 maintenance logs
■
Fault log incl. freely configurable collective fault and initial value indications
■
Individual home screens thanks to flexible parameterisation
12 integrated, freely customisable controllers with the following functions:
■
Continuous controller
■
Continuous pump controller
■
3-position stepping controller
■
2-position valve/pump controller
■
3-component controller
■
Automatic intermittent blowdown control with pulse repetition
■
Dosage controller
With P, PI or PID characteristic, dead zone, soft start, automatic runtime-dependent pump switchover and
operating position depending on the type of controller
Controller optimisation via integrated trend logging of actual values, setpoints, internal settings and
control points