GESTRA SPECTORcontrol II, Оригинальная инструкция по установке

Страница: 17 / 28

17
Factory setting
Spector control
All adjustable masks are completely available, no matter whether the indicated instruments are part of
the bus system or not. Subsequent expansion or modification is therefore possible at any time.
You can find the SPECTOR
control Runtime Licence at the rear of the equipment. Should it be necessary
to re-enter this licence number and the sticker is no longer attached to the equipment please contact
GESTRA Bremen (for more information on contact details see last page of this installation & operating
manual).
The inputs/outputs of the WAGO IO module can only be defined after having entered the number of
modules in [SPECTORcontrol]/System/IO-Module.
The system adjustments for the first commissioning are stored on the CompactFlash card. When
SPECTORcontrol is operating, data of the CompactFlash card, too, will be stored in the directory /Data.
The equipment features the following default settings:
n
Date / Time Current date and time (Daylight saving time DST: de-activated)
n
Startup page Startup page1 (1..4 freely definable)
n
Language English
n
IP address 1 (Ether 1) 192.168.0.99
n
IP address 2 (Ether 2) can be freely allocated
n
Password Level 1: aaa
Level 2: bbb
n
Node ID SC 127
n
Node ID Wago IO 126
n
Baudrate 250 kB
n
Profibus station address 10 (Slave) – other arrangements possible on request
Note
After commissioning we recommend that you use a new password.
Make sure that the same password is not used twice.
Max. length of password: 8 characters.
Commissioning procedure
Applying supply voltage
Apply mains voltage to SPECTOR control . The startup page 1 appears.
Attention
n
Please follow the installation and operating instructions of all connected devices.