27
LRR 1-52, LRR 1-53, URB 55 - Installation & Operating Manual -
850645-01
Installing the URB 55
The URB 55 is designed for installation in control cabinet doors or switch panels. The maximum panel
thickness is 10 mm.
For installation, you will need the following tools:
■
A tool for cutting the installation aperture
■
A Phillips PH2 screwdriver
A
B
Fig. 11
Fig. 12
A
Installation aperture 136 x 96 mm,
e.g. in a control cabinet door
B
4 x fastening elements
(supplied)
C
4 x mounting holes in the equipment
1.
Cut an aperture (see
Fig. 11
) in the control cabinet door or switch panel.
2.
Stick the supplied gasket to the back of the display frame.
3.
Carefully push the URB 55 visual display and operating unit through the aperture, making sure the
gasket is correctly seated.
4.
Insert the supplied fastening elements and tighten until the corners of the display frame are in contact
with the gasket.
5.
Remove the protective film from the display.
C
