53
LRR 1-52, LRR 1-53, URB 55 - Installation & Operating Manual -
850645-01
Configuring the conductivity controller
Setting the MIN/MAX switchpoints and set point
Open the parameter screen.
LRR 1-52 conductivity controller (example)
Description of parameters:
MAX alarm switchpoint
Set point
MIN alarm switchpoint
For each switchpoint, press the relevant button and
enter the required value using the virtual keypad.
The icons in the buttons change
colour to indicate switchpoints/alarm
points that are too high or too low.
Description of bar charts:
X
Actual value
W
Set point
The set point is shown in the actual
value bar chart with a small arrow.
Yw
Manipulated variable
Change of colour on alarm
The bar chart column turns red in the event
of an alarm.
