GESTRA BB 1, Оригинальная инструкция по установке

Страница: 21 / 52

21
DANGER
Risk of bruises if the equipment or
component parts fall down.

Use suitable lifting gear when moving
or lifting the equipment and/or
component parts.

Make sure that the equipment cannot
topple over.

Make sure that nobody is standing
below the lifted equipment.
 Lift off the plates at the plate supports.
 Take the plates together with the springs and
plate supports out of the body.
 Put the plates onto a bearing surface of
sufficient integrity and stability.
 Put a flat and stable cover (13) onto the springs
(1.).
 Pull the plate supports (10) off the hinge pins as
shown (2.).
WARNING
The springs are preloaded and their
tension can cause injuries.

Always wear safety goggles when
replacing the springs.
 Mount or remove one spring after the
other.
 Make sure that no uninvolved persons
are standing in close vicinity of the
equipment.
 Remove the cover.
 Carefully pull the two plates apart until the
springs are decompressed (1.).
 Pull the two hinge pins (9) out of the springs (7)
(2.).