Gestetner G056, Руководство по обслуживанию

Страница: 242 / 335

PRINTER CONTROLLER SERVICE MODE
G073/G074 5-2 SM
5.1.2 BIT SWITCH PROGRAMMING
Refer to section 5.2.2 of the service manual for the base model (G056/G058) for
how to program bit switch settings.
Bit Switch 01 - Not used (do not change any of these settings)
Bit Switch 02
No Description Function
0-3 Not used Do not change the setting.
4
Treatment of the last page
when printing a job with an
odd number of pages using
the duplex unit
0: (default): Last page not
fed through the duplex unit
1: Last page fed through
the duplex unit
0: The last page is not fed through the duplex unit, so
the last page faces the opposite way from other pages
in the job.
1: The last page is fed through the duplex unit, so the
last page faces the same way as other pages of the
job.
Set this switch to “1” when the customer wishes the last
page to be facing the same way as the other pages.
5-7 Not used Do not change the setting.
Bit Switch 03
No Description Function
0-2 Not used Do not change the setting.
3
CAD printing line widths
0: OFF (default):
1: ON - CAD Printing line
widths (255 pens)
0: CAD printing line widths is OFF.
1: CAD Printing line widths (255 pens)
Set this switch to “1” when the customer wishes to print
HP G/L2 files correctly. (Requires controller firmware
version 1.09 or newer.).
4-7 Not used Do not change the setting.
Bit Switch 04 - Not used (do not change any of these settings)
⇒
Rev. 04/2003