Gestetner G056 Скачать руководство пользователя страница 190 | Manualshive

Страница: 190 / 335

Gestetner G056 Скачать руководство пользователя страница 190

SM

G056/G058

12-4

2 SWAPBOX INSTALLATION

2.1

HARDWARE INSTALLATION

CAUTION:

1) Before installing the SwapBox in a computer, turn off the computer

and disconnect the power cable.

2) This manual does not explain how to install an ISA board in your

computer. Refer to your computer’s users manual for how to do it.

Install the SwapBox as explained in Chapter 1 to 3 of the SwapBox Manual that is
enclosed in the SwapBox package.
Then go on to the next section below for the driver installation.

2.2

DRIVER INSTALLATION

CAUTION:

1) Do not use the software disks that are enclosed with the SwapBox.
2) Ensure that you have Windows 95 - 4.00.950a or a later version

installed in your computer. (Refer to section 1.4 for more details.)

1. Turn on the computer. “SCM SwapBox” may appear during boot-up.

2. When Windows 95 starts, it finds the SwapBox automatically and installs the

necessary driver files from the Windows installation diskette(s) or CD-ROM.

3. After Windows starts, choose “PCCard” from the Control Panel.

•

If PCCard Properties is displayed, driver installation has finished.

You can go on to the next section.

•

If PCCard Wizard is displayed, go on to the next step.

4. In the PCCard Wizard, choose all the default settings to finish the wizard, then

reboot the computer.

5. After Windows 95 has restarted, choose “System” from the Control Panel.

6. Choose “Device Manager” and confirm that “SCM SwapBox Family Plug and

Play PCMCIA Controller” is listed in the PCMCIA socket category.

7. Double-click “SCM SwapBox Family Plug and Play PCMCIA Controller” and

confirm that the SwapBox is working properly.

SWAPBOX INSTALLATION

«
...
188
189
190
191
192
...
»

Содержание G056
















































































































































































































































































































































Отзывы:

Нет отзывов