Gestetner DSm635, Руководство по факсу

Страница: 73 / 102

Using Key Operator Settings
179
9
r
Deleting a destination specified as
an end receiver from the Address
Book causes the settings for the
end receiver to be deleted. If this is
the case, reprogram the end receiv-
er. If the destination has been
changed, a message is transmitted
to the new destination.
A
Press the
{
User Tools/Counter
}
key.
B
Press [ Facsimile Features ] .
C
Press [ Key Operator Tools ] .
D
Press [ Box Setting ] .
E
Select a box to program.
When programming a new box,
press
[ *Not Programed ]
.
Note
r
To change a box already pro-
grammed, press it, and then
proceed to step .
F
Press [ Transfer Box ] .
G
Enter a Box name, and then press
[ OK ]
.
Reference
“Entering Text”, General Set-
tings Guide
H
Enter a SUB Code.
Note
r
To change the SUB Code, press
[ Clear ] or the
{
Clear/Stop
}
key,
and then try again. To change
Box name, press
[ Box Name ] , and
then repeat from step .
I
Specify the condition of registra-
tion.
Programming End Receivers
A
Select an End Receiver.
Note
r
You can store five End Re-
ceivers.
B
Specify End Receivers with
Quick Dials, and then press
[ OK ] .
Note
r
You can also specify End Re-
ceivers with Group Dials.
Note
r
Repeat from step
A
to speci-
fy another End Receiver.